Latex Based All Purpose Waterproofing And Bonding Compound
Two Component High performance Acrylic Polymer Based Waterproof Coating
Acrylic Polymer Based Waterproof Protective Coating
Two Part Acrylic Polymer Based Elastomeric Waterproof Coating
Solar heat waterproofing coating
×
Latex Based All Purpose Waterproofing And Bonding Compound
Description
BEWMEN@HYDRALATEX is a single component, polymeric synthetic rubber, which can be added to any cementitious formulation, to achieve bonding and waterproofing properties.Product Application
Method of Application
Coverage Area
1.5-1.7kg/mm/m2One year from the date of manufacturing when stored in unopened sealed and dry condition at a temperature range from +10 to 45 degree
Packing1kg,5kg, 20kg, 100kg and 200kg HDPE drum
SafetyWear hand gloves, safety shoes and safety goggles while using and handling the product. In case eyes or mouth are affected wash with clean water and seek medical treatment immediately.
Two Component High performance Acrylic Polymer Based Waterproof Coating
Description
BEWMEN@HYDRACOAT PRIME is a two component, high performance, acrylic polymer modified cementitious waterproofing protective coating system in slurry form.Product Application
Method of Application
Application for BEWMEN@HYDRACOATS Extra all surfaces must be prepared properly cleaned to remove all dust, then after use for hydra coats extra BEWMEN@HYDRACOATS PRIME LIQUID PART (polymer) is mixed with POWDER PART in the ratio of 1:1.4 by weight with a help of low speed (300-400 rpm) paddle mixer. The mix has to bestirred thoroughly, a uniformed smooth slurry is obtained.Stand for 4-5 minutes after mixing to release air from the mix. start an application by brush, roller or any suitable tools on prepared surface.Coverage Area
1.5-1.7kg/mm/m2One year from the date of manufacturing when stored in unopened sealed and dry condition at a temperature range from +10 to 45 degree
Packing1set, as per Requirement
SafetyWear hand gloves, safety shoes and safety goggles while using and handling the product. In case eyes or mouth are affected wash with clean water and seek medical treatment immediately.
Acrylic Polymer Based Waterproof Protective Coating
Description
BEWMEN@HYDRACOATS is an acrylic polymer used as waterproof for concrete structure. When HYDRACOATS Polymer is mixed with a liquid slurry, cement is formed and this slurry used as waterproof coating.Product Application
Meethod of Application
Application for BEWMEN@HYDRACOATS all surfaces must be prepared properly cleaned to remove all dust, then after use of hydra coats. Mixing polymer is mixed with neat fresh cement in the ratio of 1:2by weight with a help of low speed (300-400 rpm) mixer. The mix has to be stirred thoroughly, a free smooth slurry is obtained. start an application by brush, roller or any suitable tools on prepared surface.Coverage Area
2-2.5 kg / m2 in two coatsOne year from the date of manufacturing when stored in unopened sealed and dry condition at a temperature range from +10 to 45 degree
Packing5kg, 20kg, 100kg and 200kg HDPE drum.
SafetyWear hand gloves, safety shoes and safety goggles while using and handling the product. In case eyes or mouth are affected wash with clean water and seek medical treatment immediately.
Two Part Acrylic Polymer Based Elastomeric Waterproof Coating
Description
BEWMEN@HYDRATICS is a two component, elastomeric, acrylic polymer waterproofing protectivecoating system in slurry form.Product Application
Method of Publication
Application for BEWMEN@HYDRATICS all surfaces must be prepared properly cleaned to remove all dust, then after use for hydratics, BEWMEN@HYDRATICS (polymer) is mixed with POWDER PART in the ratio of 1:2.5by weight with a help of low speed (300-400 rpm) paddle mixer. The mix has to be stirred thoroughly, uniformed smooth slurry is obtained. Stand for 4-5 minutes after mixing to release air from the mix. start an application by brush, roller or any suitable tools on prepared surface.Coverage Area
1.8-2 m2/ kgOne year from the date of manufacturing when stored in unopened sealed and dry condition at a temperature range from +10 to 45 degree
Packing1set, as per Requirement
SafetyWear hand gloves, safety shoes and safety goggles while using and handling the product. In case eyes or mouth are affected wash with clean water and seek medical treatment immediately.
Solar heat waterproofing coating
Description
BEWMEN@HEAT SHIELD is a heat reflecting eco-friendly paint for a roof and exterior walls.HEAT SHIELD is acrylic polymer based elastomeric polymer and high-performance waterproofing membrane.Product Application
Coverage Area
One year from the date of manufacturing when stored in unopened sealed and dry condition at a temperature range from +10 to 45 degree
Packing10kg,20 KG drums
SafetyWear hand gloves, safety shoes and safety goggles while using and handling the product. In case eyes or mouth are affected wash with clean water and seek medical treatment immediately.